/ / Stove "burzhuyka" for the garage with their own hands on the working and on the wood. How do I make a garage for my garage?

Furnace "burzhuyka" for the garage with their own hands on working and on wood. How to make a "garage" for the garage with their own hands?

Garage room requires special arrangement. Due to the fact that it stores not only some food products, but also a vehicle. It is necessary to make both qualitative internal and external furnish, isolation, and to spend system of heating. In the garage you need a constant optimal temperature regime. If in the warm season the heating of the room is not required, then in the winter it is quite possible severe frosts, which will lead to some disastrous consequences in the storage of food and car. There may be dampness, which in time will cause mold on the walls of the building.

garage for garage by one's own hands

Optimum system of heating of garage

To date, there is a huge number of heating systems, which are effectively used to heat the garage. There is equipment:

  • factory production;
  • homemade devices.

It is possible to use heating systems on water,on solid and liquid fuels, on gas. There are systems that work with electricity. Despite such a wide assortment of these products, the manufactured "burzhuyka" for the garage with its own hands was very popular and enjoyed. This is the most optimal way of heating the garage, and for the costs it will be the cheapest.

Let's dip a bit into the story

There was such a device for heatingpremises in the early 20th century. At that time, the burger was quite expensive, since it required a solid fuel for the work - firewood. If earlier this equipment could be afforded only by well-off people, then today "burzhuyka" has become the most economical way to heat any room.

self-made gas stoves for garage

Initially, this type of construction representeda cylinder of metal. Also widely used for its manufacture is a metal large box. Over time, the construction began to improve. Fuel has become more affordable, and even now such an adaptation can be found both in the country and in the garage.

Ways of making "burzhuyki"

In addition to the fact that a "burzhuyka" can be madefor the garage with their own hands, there is also a factory production of this equipment. Modern manufacturers of steel began to develop such models of "burzhuyki", which not only can effectively heat the room, but also become its full-fledged adornment.

Now the equipment can have not onlynon-standard form, but also on its surface various decorative details in the form of forged or cast metal elements. All only according to the developed unique design of "burzhuyki."

Types of "burzhuyki" depending on the fuel used

Today, a "burzhuyka" can be madefor the garage with their own hands on working and on wood. This equipment has certain distinctive features and characteristics. You can make both of its kind yourself.

Varieties of construction "stove"

Quite simply made the "stove" for the garage with his own hands. To do this, just select its main view.

So, this equipment can be:

  • stationary;
  • refined.

Stationary homemade "stove" for the garagerepresent concrete structures. They are used for uninterrupted heating of the garage room. They are more massive and heavy. For their construction is necessary to make the foundation. This equipment is able to heat up rather quickly and for a long time to give off its heat. The owner can only maintain the temperature in the furnace. There is one, but a significant drawback of such a "stove". It consumes too much fuel.

wood stove for garage do-it-yourself drawings

In order to make this structure more economical, it will be necessary to construct it from refractory bricks.

Made the "stove" for the garage with their own hands an improved type is a simpler design. It is constructed from metal and has several sections:

  • firebox;
  • ash department.

Also for convenient and efficient use.This equipment has a removable cover. As a rule, for good heat recovery in the manufacture of "stoves" use cast iron. It has excellent heat dissipation. An essential element of this design are metal legs, which ensure the normal circulation of air masses under the equipment.

It can work and that and another made "stove" for the garage with their own hands on working out or on solid fuel.

What is this equipment made of?

Quite often homemade "stoves" for the garagecan be manufactured using metal gas cylinders. This is the most common type of equipment that is economical. At its cost, an empty gas cylinder will be several times lower than the sheet metal, from which “stoves” can also be made. Simple metal boxes are also widely used in production. They can be of different sizes, and for more efficient heating of the room, instead of one chimney, additional structures are welded to the structure, ensuring optimal heating of the room.

potbelly stove for a garage with your hands on working out and wood

Stages of homemade potbelly manufacture

The construction of this heating equipmentconsists of several stages. You need to think about its size and determine what it will be made of. Next, a drawing is made of a stove for the garage. It indicates not only the parameters of the whole structure, but also the amount of material used for its construction.

Quite simply made the "stove" for the garage with his own hands. Drawings of this equipment are made independently. You can also resort to the help of specialists.

Then there is the welding of the structure and its refinement.

What is needed for the manufacture of this equipment?

Many wonder how to make a “stove” for the garage on their own. There is nothing complicated about it. To do this, choose the best material option and special equipment.

So, for the construction of this equipment will need:

  • gas bottle;
  • metal sheets;
  • metal pipes;
  • welding equipment;
  • Bulgarian;
  • utility tools.

Homemade stoves for the garage can be made using metal barrels.

petite stove for garage do it yourself

The manufacturing process of the "stove"

So, the work process begins with markup.metal cylinder or barrel. In order for the stove “stove” for the garage to give off heat well, you need to initially choose the right size. The optimal cylinder parameter will be 50 liters. As for the wall thickness, they must be at least 2-3 mm. If the walls of the structure are thinner, then the stove may, in the process of burning, “lead”.

drawing potbelly for garage

It is necessary to apply a marker on one of the sides.marks exactly where will be located the door of the furnace and blew. The size of the firebox should be such that it can hold free wood with a diameter of 10 cm. As for the size of the door for the blower, it can be any. The most important thing is to be able to properly clean the equipment from residual products of combustion.

The height of the location of the blower is at least 3-4 cm from the bottom of the cylinder or barrel. The furnace is located at a distance of 5 to 10 cm from the blower.

On the reverse side there is a place for welding metal pipe for distributing heat throughout the room. Its size must be at least 100 mm.

After that the cylinder or barrel cap is cut off.grinder. With the help of the same tool, strictly according to the marks made, the doors of the firebox and the fan are cut. The cut off lid of a barrel or cylinder is used to create a special platform that will serve as a partition between the ash department and the firebox. Inside this site, holes are already being made for the installation of grates.

Further inside the barrel metal corners are welded at a height of 2 cm from the door of the ash section. The platform will be installed on them.

Grid-irons for the “stove” can be made independently. For this, small size fittings (10-12 mm) are used. And you can buy ready-made devices of this type.

Further work transferred to the external surface. There are door hinges welded in the cut holes. The most important thing in this is to close the doors tightly, and the smoke that forms in the process of burning does not get into the room.

Then a cover is cut from the metal sheet.for the "stove". It makes a hole for the chimney. If during the welding process small gaps were formed, then they can be treated with asbestos. Similar work is carried out with a pipe that provides space heating.

oven stove for garage

Upon completion of the installation of all components of the "stove" spend cleaning the seams with a grinder.

Then the stove must be installed in a safe garage.place It should not contain any flammable mixtures or liquid fuels to avoid the ignition process. Next is the kindling of equipment. With its help in the system determine leaking compounds. They are eliminated. After that, the "stove" is ready for use.

In the process of construction of this equipment it is necessary to remember that it should only be operated in accordance with the requirements of fire safety.

Similar news


Comments (0)

Add a comment